Search Continuum Mechanics Website

Stress

 home > introductory mechanics > stress
Prev Up Next

Introduction

Stress

This page reviews the familiar stress tensor. Stress is always simply \(Force / Area\), but some complexity does arise because the relative orientation of the force vector to the surface normal dictates the type of stress. When the force vector is normal to the surface, as shown at the right, the stress is called normal stress and represented by \(\sigma\).

When the force vector is parallel to the surface, the stress is called shear stress and represented by \(\tau\). When the force vector is somewhere in between, then its normal and parallel components are used as follows.

\[ \sigma = {F_\text{normal} \over A} \qquad \text{and} \qquad \tau = {F_\text{parallel} \over A} \]
Of course, things can get complicated in nonlinear problems with large deformations (and rotations) because the final deformed area may be different from the initial area, among other things. We will ignore all these complexities for now and assume that before-and-after differences are negligible. So there will be no need to specify whether the force and area are for undeformed or deformed conditions.


Component Definitions

Simple Stresses
Many components are needed to capture a complete stress state. Consider the object in the 2-D example here that is being pulled in simple tension, though not in a direction parallel to any global axis. Standard practice is to (virtually) cut it perpendicular to the global axes as shown. This first cut results in an area with unit normal parallel to the global x-axis. The force on this area contains both normal and parallel components. The stresses are defined as

\[ \sigma_{xx} = {F_x \over A_x} \qquad \text{and} \qquad \tau_{xy} = {F_y \over A_x} \]
Note how the two subscripts on the stress variables match those on the force and area components with one subscript coming from each.

Alternately, one could (virtually) cut the object horizontally to produce a surface with an outward normal in the y-direction. This leads to

\[ \sigma_{yy} = {F_y \over A_y} \qquad \text{and} \qquad \tau_{yx} = {F_x \over A_y} \]
If a numerical example were worked out, one would notice an amazing result. It is that \(\tau_{xy} = \tau_{yx}\). This will always be true in order to maintain rotational equilibrium. This is discussed in more detail next.


Equilibrium

The complete (2D) stress state at a point is shown below. The key difference between the left and right figures is the shear stresses. But they will be discussed later.

First, let's look at the normal stresses, \(\sigma_{xx}\) and \(\sigma_{yy}\). Note how the x-normal stress, \(\sigma_{xx}\), is present on both the left and right sides of each square in order to maintain horizontal equilibrium. These x-normal stresses represent tension because they point out of the square. Tensile normal stresses have positive values, and compressive normal stresses have negative values.

The y-normal stresses, \(\sigma_{yy}\), are also present on two surfaces, top and bottom, in order to maintain vertical equilibrium. Like \(\sigma_{xx}\), \(\sigma_{yy}\) is also drawn to represent tension, which is positive.

The difference between the left and right pictures is that \(\tau_{yx}\) in the left figure is replaced by \(\tau_{xy}\) in the right figure. The left figure contains two shear stress values, \(\tau_{xy}\), which rotates the square counter-clockwise, and \(\tau_{yx}\), which rotates the square clockwise. But if the two shear values are not equal, then the square will not be in rotational equilibrium. The only way to maintain rotational equilibrium is for \(\tau_{xy}\) to be equal to \(\tau_{yx}\). So there is no need to have two separate variables. The right figure contains only one, \(\tau_{xy}\).

Basic 2-D Stress State



2-D Notation

Stress is in fact a tensor. Why? Because it obeys standard coordinate transformation principles of tensors. This alone appears to be enough to make it so. It can be written in any of several different forms as follows. They are all identical.

\[ \boldsymbol{\sigma} = \left[ \matrix{ \sigma_{11} & \sigma_{12} \\ \sigma_{21} & \sigma_{22} } \right] = \left[ \matrix{ \sigma_{xx} & \sigma_{xy} \\ \sigma_{yx} & \sigma_{yy} } \right] = \left[ \matrix{ \sigma_{xx} & \tau_{xy} \\ \tau_{yx} & \sigma_{yy} } \right] \]
But since \(\tau_{xy} = \tau_{yx}\), all the tensors can also be written as

\[ \boldsymbol{\sigma} = \left[ \matrix{ \sigma_{11} & \sigma_{12} \\ \sigma_{12} & \sigma_{22} } \right] = \left[ \matrix{ \sigma_{xx} & \sigma_{xy} \\ \sigma_{xy} & \sigma_{yy} } \right] = \left[ \matrix{ \sigma_{xx} & \tau_{xy} \\ \tau_{xy} & \sigma_{yy} } \right] \]
Setting \(\tau_{xy} = \tau_{yx}\) has the effect of making (requiring in fact) the stress tensors symmetric.


3-D Notation

stress

All of the above conventions in 2-D also apply to the 3-D case. Notation for the 3-D case is as follows.

\[ \boldsymbol{\sigma} = \left[ \matrix{ \sigma_{11} & \sigma_{12} & \sigma_{13} \\ \sigma_{21} & \sigma_{22} & \sigma_{23} \\ \sigma_{31} & \sigma_{32} & \sigma_{33} } \right] = \left[ \matrix{ \sigma_{xx} & \sigma_{xy} & \sigma_{xz} \\ \sigma_{yx} & \sigma_{yy} & \sigma_{yz} \\ \sigma_{zx} & \sigma_{zy} & \sigma_{zz} } \right] = \left[ \matrix{ \sigma_{xx} & \tau_{xy} & \tau_{xz} \\ \tau_{yx} & \sigma_{yy} & \tau_{yz} \\ \tau_{zx} & \tau_{zy} & \sigma_{zz} } \right] \]
But rotational equilibrium requires that \(\tau_{xy} = \tau_{yx}\), \(\tau_{xz} = \tau_{zx}\), and \(\tau_{yz} = \tau_{zy}\). This also produces symmetric tensors.

\[ \boldsymbol{\sigma} = \left[ \matrix{ \sigma_{11} & \sigma_{12} & \sigma_{13} \\ \sigma_{12} & \sigma_{22} & \sigma_{23} \\ \sigma_{13} & \sigma_{23} & \sigma_{33} } \right] = \left[ \matrix{ \sigma_{xx} & \sigma_{xy} & \sigma_{xz} \\ \sigma_{xy} & \sigma_{yy} & \sigma_{yz} \\ \sigma_{xz} & \sigma_{yz} & \sigma_{zz} } \right] = \left[ \matrix{ \sigma_{xx} & \tau_{xy} & \tau_{xz} \\ \tau_{xy} & \sigma_{yy} & \tau_{yz} \\ \tau_{xz} & \tau_{yz} & \sigma_{zz} } \right] \]



Thank You

Thank you for visiting this webpage. Feel free to email me if you have questions.

Also, please consider visiting an advertiser above. Doing so helps to cover website hosting fees.

Bob McGinty
bmcginty@gmail.com


Entire Website - $12.95

For $12.95, you receive two formatted PDFs (the first for 8.5" x 11" pages, the second for tablets) of the entire website.

Click here to see a sample page in each of the two formats.

Email address to receive PDFs

Intro Mechanics Chapter - $1.99

For $1.99, you receive two formatted PDFs (the first for 8.5" x 11" pages, the second for tablets) of the mechanics chapter.

Click here to see a sample page in each of the two formats.

Email address to receive PDFs



   Copyright © 2012 by Bob McGinty